tensileproperties相关论文
Mg-Al-Zn-Ca-Y alloys with excellent ignition and corrosion resistances-termed SEN alloys (where the letters “S,” “E,......
Microstructure evolution and corresponding tensile properties of Ti-5Al-5Mo-5V-1Cr-1Fe alloy control
...
The effect of reactive element yttrium on purification and carbide precipitation of superalloy K4169 has been studied th......
The microstructure and fatigue and tensile properties of 316L stainless steel fabricated via laser powder bed fusion (L-......
The relationship between the tensile properties and δ (delta) phase precipitation in cast alloy IN625 was investigated ......
Microstructure and Its Influence on the Mechanical Properties of Ni-28W-6Cr-Based Alloy-Welded Joint
Microstructure and mechanical properties of Ni-28W-6Cr alloy-welded joints produced by gas tungsten arc welding were inv......
Tensile and Fracture Properties of 15 vol％ SiCp/2009Al Composites Fabricated by Hot Isostatic Pressi
...
...
...
The microstructure,tensilc property and wear resistance of 7075 aluminum matrix composite reinforced with TiC particles ......
...
Effects of different surface-modified SiCP on the microstructures and tensile properties of SiCP/201
The pre-oxidized SiO2 layer and salt-bath plated Ti5Si3 coating layer were developed on the surface of SiCP.Effects of s......
For outstanding mechanical properties,the amorphous materials attracted the interests of scientists all over the world i......
Metallic clad plates have a widespread application in nuclear power plant for safety injection tank.A novel bi-layers st......
The current work investigates the effect of structural parameters on the tensile properties of C/SiC pipe through finite......
Study on microstructure, tensile properties and fractography of A356 aluminum alloy produced by expe
The microstructure, tensile properties and fractography of A356 aluminum alloy with As-cast and T6 conditions obtained u......
Thermoplastic reinforced with natural fibers have a plenty of opportunities in industrial application due to their envir......
首先采用溶液抽滤法分别制备了原装和 酸化碳纳米管纸（又称巴基纸），并通过预浸和热压工艺 制备了巴基纸/ 环氧复合材料。对巴基纸复合......
It is a mode of 7th International Conference on Surface Engineering. AISI 321 stainless steel was salt bath nitrided at ......
The equiatomic multi-principal-element alloy,CrCoNi,as a single-phase FCC solid solution,displays excellent strength-tou......
Effects of different surface-modified SiCP on the microstructures and tensile properties of SiCP/201
The pre-oxidized SiO2 layer and salt-bath plating Ti5Si3 coating layer were developed on the surface of SiCP.Effects of ......
Comparative study on the mechanical behavior of carbon weft-knitted biaxial fabrics stitched by poly
The carbon weft-knitted biaxial fabrics stictched by polyester fibers and preoxidized PAN fibers were prepared respectiv......
Effects of rolling deformation on the microstructure and mechanical properties of network structured
TiB whiskers reinforced pure Ti (TiBw/Ti) composites with a novel network microstructure were successfully fabricated by......
Compared with the conventional microcellular foaming injection molding, a novel technology named Supercritical fluid-lad......
Indirect extrusion of Mg-l0%Sn (mass fraction) alloys was performed at three different working temperatures.The effect o......
α2 phase precipitation behavior and tensile properties at room temperature and 650℃in an(α+?)titaniu
The microstructure,room temperature and 650℃tensile properties of an(α+β)titanium alloy were investigated after aging......
The effect of heat treatment on microstructure and tensile properties of as-cast Al0.5CoCrFeNi high-en-tropy alloy was i......
Addition of rare earth elements for improving the tensile properties of aluminum alloys has attracted great attention.In......
采用1Cr11Ni2W2MoV合金对1Cr12Ni3MoVN热强马氏体不锈钢铸件的槽缺陷进行了激光修复(LR)研究。激光修复区(LRZ)的组织主要为马氏体......
采用激光增材制造技术制备了钴基高温合金DZ40M, 研究了沉积态DZ40M的微观组织, 对比分析了不同热处理制度下DZ40M的微观组织及力......
通过室温拉伸测试、透射电子显微镜(TEM)、差示扫描量热法(DSC)研究了预拉伸对高强Al-ZnMg-Cu-Zr合金AA7085板材淬火敏感性效应的......
Fluidity,Microstructure,and Tensile Properties of Sub-rapidly Solidified Mg-6Al-4Zn-xSn (x=0,0.6,1.2
In this paper,the influence of the Sn element on the melt viscosity,grain size,shrinkage,and tensile properties of the s......
Superalloy is developed to meet the stringent requirements of materials used in aeroengine hot-end parts. It has become ......
Aging precipitation characteristics and tensile properties of Al-Zn-Mg-Cu alloys with different addi
The increase in zinc content in Al-Zn-Mg-Cu alloys provides an effective method to enhance the strength.Transmission ele......
Microstructures and tensile properties of a newβhigh-strength titanium alloy Ti-5321(Ti-5 Al-3 Mo-3 V-2 Zr-2 Cr-1 Nb-1 ......
The effect of rolling temperature on both two- and single-phase regions and annealing in a temperature range of 700-950......
系统研究了Ti-6Al-3Nb-2Zr-1Mo-xTa(x=0,0.2,0.5,1.0,3.0,5.0)合金的微观组织、拉伸性能、夏比冲击韧性和耐海水腐蚀性.结果表明,......
Phase stability and its effect on tensile properties of MAR-M247 alloy have been investigated during thermal exposure at......
Based on the 3 factors and 3 levels orthogonal experiment method,compositional effects of Mg,Si,and Ti addition on the m......
为深入了解Ti−8Al−1Mo−1V钛合金等轴α相在退火过程中的演变行为,基于粗化指数n及α界面迁移激活能的计算对其静态粗化机制进行......
期刊
在Al−6%Cu合金中添加5.0%Ni(质量分数),研究其对合金凝固时的冷却速率(T)和生长速率(VL),显微组织中枝晶长度、金属间化合物(IMCs......
期刊
Improvement of Creep and High Temperature Tensile Properties by Adding W to Orthorhombic Ti2AlNb-Bas
The Orthorhombic Ti2AlNb-based alloys (O alloys) are potential high temperature materials for applications in aircraft e......
航天航空用坚固件材料ＴＢ３合金是一种亚稳定β钛合金。本文对比了两种热加工工艺对该合金的显微组织与性能的影响。采用锻造加后续热轧......
